The Ultimate Front Line Rotator Capable of Handling Both Your Recovery and Towing Needs

    The Century 1130 30-ton and 1140 40-ton rotators are both designed to be a versatile yet weight-conscious unit for towing and recovery.   The 1130 unit features dual 25,000-lb planetary two-speed winches and a fabricated two-stage recovery boom.  The 1140 unit employs dual 35,000-lb. planetary two speed winches and a choice of a fabricated two- or three-stage recovery boom.  Finally, both the 1130 and 1140 units provide the operator with 360 degrees of boom rotation (190 degrees in each direction) and include an LDU underlift that provides 15,000 lbs. of lift capacity at 136" of extension and that operates independently of the recovery boom.

    Print Product Brochure


    156" or 180" C.B. Aluminum Modular Body Rubber Fenderettes & Mud Flaps
    Large Compartments Chain Rack & Fork Holders
    Compartments Over The Wheel Wall Rubber Isolators
    Choice of Chrome Double Action Latches or
         Push to Open/Push to Close Latches
    Rigid Torsional Resistant
         Mounting Frame
    Keyless Lock/Unlock Tool Compartments Enclosed Inner Wheel Wells
    LED Federal #108 Lighting Tailboard Mounted D-Rings (1 Pair)
    LED Toolbox Lighting Two Rear Outrigger Spade Attachments


    360° Plus of Boom Rotation 3-Stage Hydraulic Rear Outriggers
         with Removable Pads
    Proportioning Power Boom Extension
         with Couner Balance Valve
    Air Activated House Lock, Secures 
         Boom in Rear or Forward Position
         for Transport
    Dual Control Stations House Lock Indicator & Window
    Holding Valves for Boom
         Elevation & Extension 
    Hydraulic Pump
    Nylatron Boom Side Pads 360° Sheave Heads
    Boom Angle Indicator Hydraulic Pressure Gauge
          (Driver Side)
    Cable Tensioners & Winch
          Air Free Spool
    8 Function Wireless Remote
         and 9 Function Floor Mounted
         Switch Panel
    Dual 2-Speed Winches (1130)   "D" Rings Mounted on
         1st & 2nd Stage
    Hydraulic Front Outriggers (Over Frame) (1140)   "D" Rings Mounted on
         1st & 2nd Stage (2-Stage)
      (1140)   "D" Rings Mounted on
         1st & 3rd Stage (3-Stage)

    Print Product Brochure


    Power Elevation & Extension Low Profile Fork Holders
    Power Tilt & Hydraulic Fold 8 Pairs of Cast Steel Forks
    3-Stage Design 1 Pair of Spring Lift Adapters
    Low Profile 70° Pivoting Crossbar 1 Pair of Hook Adapters
    2 Piece Pivot Pin Safety Chains in Tailboard
    Upper/Lower Thrust Washer  


    212" Two-Stage Under-frame
      "H-Beam" Front Outriggers
    Radio Proportional Controls with
         Dual Manual Controls 
    262" Three-Stage Under-frame
      "H-Beam" Front Outriggers  (1140)
    Air Shift PTO
    212" RXP Front Outriggers Manual Override Control for PTO
    Additional Lift Forks & Attachments Engine Data Information Center
    Front Outrigger Side Pull Attachment Tailboard Underlift Controls
    4-Stage Rear Outriggers  (1140) 24", 30", 36" or 48" Tunnel Box
    Dual 15K Turret Mounted Winch
      (N/A on 1140s with RXP Option)
    Chain Rack for 48" Tunnel Box
    25K Belly Drag Winch  (1130 only) Shelf Kit for 36" & 48" Tunnel Box
    35K Belly Drag Winch
      (N/A on 1140s with Turret Mounted Winches)
    Chain & Strap Packages
    Solid State Power/Distribution System
         with Wireless Controls and Front &
         Rear Multi-Function Switch Panels
    Aluminum Tubular Pylon
    LDU Lowrider Underlift Additional Tailboard "D" Rings
    SDU-4 Underlift  (1140) Tailboard Cable Tiebacks
    SDU-4 LowRider Underlift   (1140) Rear Camera & Monitor
    Rear Air & Electrical Hook-ups Navigation System
    Side Mounted "D" Rings
         (Over-frame outriggers only)
    Xenon Boom Lights
    2nd Stage Mounted "D" Rings (3-Stage) (1140) Halogen Work & Hook-Up Lighting
    Cam-lock for "D" Ring Hold-Back Additional Lighting
    Radio Proportional Illuminated Controls  

    Print Product Brochure


    Maximum Angle 60°
    Boom Rotation (From Stowed Position) 190° CW & CCW
       Retracted 60,000 lbs.
       Extended 25,000 lbs.
       Maximum Hook Height 354"
       Boom Extension 130"
    (1140) 2-Stage  
       Retracted 80,000 lbs.
       Extended 32,000 lbs
       Maximum Hook Height 360"
       Boom Extension 144"
    (1140) 3-Stage  
       Retracted 80,000 lbs.
       Extended 20,000 lbs.
       Maximum Hook Height 427"
       Boom Extension 216"


    Fully Retracted - 54" 35,000 lbs.
    Fully Extended - 130" 15,000 lbs.
    Tilt 10° + / -
    Tow Rating 80.000 lbs.


    Rating (first layer of drum) each Winch 25,000 lbs.
    Diameter and Length (each Winch) 5/8" x 200'
    Type 6 x 37 IWRC
    Rating (first layer of drum) each Winch 35,000 lbs.
    Diameter and Length (each Winch) 3/4" x 200'
    Type 6 x 37 IWRC


    GVWR 54,000 lbs.
    Minimum C.B. 156" or 180"
    Maximum Cab to Axle (Clear) 228"
    Maximum Frame Height 42"
    After Frame from Center of Rear Axle 40"
    R.B.M. 3,000,000 (in./lbs.)

    NOTE:  All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. reserves the right to change or modify product and/or specifications without notice or obligation.  Some equipment shown is optional.


    Contact Your Sales and Service Representatives at
    1-662-280-6761 M-F 8AM - 5PM CST.
    Toll Free 1-866-280-6761 - Fax 1-662-280-6875

    Contact Your Sales Representatives   For Your Parts and Service Representative












    ©2000  Jeff Ingram Wrecker Sales, Inc.
    All Rights Reserved.