CENTURY 1060

    FOR THOSE WHO DEMAND THE BEST IN POWER and PERFORMANCE
      Click here to view this product's brochure

     Century's 1060 has set the industry standard for superior design and performance in the heavy duty, non-integrated, recovery equipment. The 1060 2-Stage and 3-stage is ideal for the professional tower who prefers a fixed recovery boom with an independent underlift. Century offers the 1060 in a 2-Stage and 3-Stage configuration, each of which is available with  tandem or tri-axle tool compartments. Century, for those who demand the best in
     power and performance.

    STANDARD BODY FEATURES

     96" Wide Aluminum Modular Body  180" C.B.
     Large Forward Compartments  Compartments Over the Wheel Well
     Double Panel Doors  Door Checks
     Double Action Latches with Keys  Federal #108 Lighting
     Toolbox Lighting  Rubber Fenderettes
     Mud Flaps  Side Worklights
     Chain Rack  Fork Holders
     Attachment Storage  Rubber Isolators
     Enclosed Inner Wheel Wells  Rigid Torsional Resistant Mounting Frame
     Tailboard Mounted D-Rings  

    STANDARD BOOM FEATURES

     Power Elevation  Hydraulic Reservoir with an Oil Level Sight
     Gauge, Tank Drain, and Enlarged Access
     Panel
     Nylatron Boom Slide Pads  Holding Valves for Boom Elevation & Extension
     Dual 2-Speed Winches  Cable Tensioners
     Winch Air Free Spool  Hydraulic Rear Outriggers with  Flipper Feet
     Hydraulic Pump  360° Sheave Heads
     Dual Control Stations   Power Pal System, 8 Function Hand Held
     Lanyard and 9 Function Floor Mounted
     Switch Panel
     Hydraulic Pressure Gauges (Driver Side)  2 "D" Rings Mounted on Inner and Outer  Boom

    STANDARD UNDERLIFT FEATURES

     Power Elevation  Power Extension
     Power Tilt  Hydraulic Fold
     3-Stage Design  2 Piece Pivot Pin
     Upper/Lower Thrust Washer  Low Profile Crossbar
     70° Pivoting Crossbar  Low Profile Fork Holders
     8 Pairs of Cast Steel Forks  1 Pair of Spring Lift Adapters
     1 Pair of Hook Adapters  Safety Chains in Tailboard

    OPTIONAL EQUIPMENT

     Additional Lift Forks  Low Pull "D" Ring Kit
     Extension Storage Compartment  Chain Package
     Endless Loop Sling Package  Recovery Straps
     Snatch Blocks  Light Bar
     Snatch Block Storage Rack  Super Duty Tire Lift - 25,000 lb. Capacity
     with 25,000 lb. Crossbar
     25,000 lb. Crossbar  Strobe Kits
     Xenon Boom Lights  Halogen Work & Hook-Up Lighting
     Wide Load Light Bar  Low Rider Underlift
     Rear Camera & Monitor  Engine Data Information Center
     Installation  Navigation System
     Rear Air & Electrical Hook-Ups  Power Touch System - Includes 15-Function
     Wired and Wireless Controls, In-Cab Underlift
     Control, and Front & Rear Function Switch
     Panels
     Air Shift PTO  Single or Dual Drag Winches
     (Except XLT Series)
     Tailboard Underlift Controls  Manual Override Control for PTO
     Convenience Group (Rails & Steps)  24", 30", 36", or 48" Tunnel Saddle Box
     Offset Fork Holder Extension  Aluminum Dress-Up Kits
     3-Drawer Toolbox  7-Drawer Toolbox
     Chain Hook Slide Adapter  Folding Wash-down Sink
     Heavy Duty Tire Lift   Fork Riser Brackets
     Tailboard Cable Tiebacks  Pintle Hook Attachment
     5th Wheel Plate
     (Requires Pintle Hook Attachment)
     Trailer Ball Adaptor
     (Requires Pintle Hook Attachment)
     Additional Lighting  

    BOOM SPECIFICATIONS

     1060 2-Stage
      Retracted 30° Extended 30°
     Boom Structural Rating (S.A.E.) 120,000 lbs. 35,000 lbs.
     Maximum Angle

     60°

     Maximum Hook Height (inches)  362"
     Reach Past Tailboard at 30°
     Boom Angle (inches)
     170"
     1060 3-Stage  
     Boom Structural Rating (S.A.E.) Retracted 30° Extended 30°
      120,000 lbs. 24,000 lbs.
     Maximum Angle  60°
     Maximum Hook Height (inches)  433"
     Reach Past Tailboard at 30°
     Boom Angle (inches)
     253"

    WINCH SPECIFICATIONS

     Winch Capacity  (2) 50,000 lbs.
     Winch Type  Planetary 2-Speed
     Cable Specifications  3/4" x 250'      6x37      I.W.R.C.
     Air Cable Tensioners  Standard
     Air Winch Clutch Release  Standard
     1060 - 2 Stage

     1060 - 3 Stage

     

    UNDERLIFT SPECIFICATIONS

     SDU-4
     Capacity Fully Extended
     to C.L. of Forks
     17,000 lbs. @ 132"
     Capacity Fully Retracted
     to C.L. of Forks
     55,000 lbs. @ 54"
     Underlift Tilt  10° +    10° -
     Low Rider
     Capacity Fully Extended
     to C.L. of Forks
     18,000 lbs. @ 165"
     Capacity Fully Retracted
     to C.L. of Forks
     55,000 lbs. @ 66"
     Underlift Tilt  10° +     7° -  
     SDU-4

     

    CHASSIS RECOMMENDATION

     ALL MODELS
     Front Axle (lbs.)  20,000
     Rear Axle (lbs.)  46,000
     Clear C.A. / C.B.  180"
     After Frame from Center of Rear Axle  40"
     R.B.M. (in./lbs.)  3,500,000

     *All recommendations are minimums.  Heavier specifications may be required depending on chassis and equipment weight. The outside frame rails of chassis extending behind the cab must be free of fuel tanks, air tanks, battery boxes, etc. A tandem chassis may be used but a tri-axle is recommend for rotator applications. Maximum frame height for units equipped with the SDU-4 underlift is 42". Always consult your local distributor or the factory for additional information.


     All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Miller Industries Towing Equipment Inc. reserves the right to change or modify product and or specifications without notice or obligation.  Some equipment shown is optional.

    Click here to view this product's brochure

       

    Contact Your Sales and Service Representatives at
    1-662-280-6761 M-F 8AM - 5PM CST.
    Toll Free 1-866-280-6761 - Fax 1-662-280-6875
     

    Contact Your Sales Representatives   For Your Parts and Service Representative

    Jeff@Wrecker-Sales.com

     

    Email  Parts@Wrecker-Sales.com

    or Dale@Wrecker-Sales.com

       

     

     

     

     

     

      

     


    ©2000  Jeff Ingram Wrecker Sales, Inc.
    All Rights Reserved.