The LCG Carrier - Low Center of Gravity30 & 40 Series

    Miller Industries has introduced a new L.C.G. (Low Center of Gravity) Industrial Carrier. The L.C.G. carrier is available in deck lengths from 26-30 feet with deck capacities of 30,000 or 40,000 lbs. The carrier uses a revolutionary new patent pending subframe design that allows the carrier deck to sit 6" to 8" lower than conventional industrial carriers. The low deck height allows for the transport of many loads that would be over height on a traditional industrial carrier and would need to be hauled on a trailer. Additionally the L.C.G. Carrier is more stable Against sway and rollover with heavier loads and provides a load angle as low as 11 degrees making it ideal to load equipment and machinery. The operator is able to secure most loads from the ground without the need to climb up on the deck. The unit is designed to be mounted on a chassis equipped with super single rear Wheels and tires.


    Print Product Brochure



    Full Length Sub Frame Winch Air Clutch Release
    Full Length Nylatron Slide Pads Bed Anti-Tilt Feature
    Painted with Black Acrylic Urethane Dual Lift Cylinders
    Driver's & Passenger Side Chain Trays Dual Extension Cylinders
    Fixed Position Stabilizer with Adjustable
               Extension Stands
    Positive Lock Down System
    Six Tie-Down Points (2 Front, 4 Rear) Dual Illuminated Controls
    Floor Level Sides with Stake Pockets Back-Up Alarm
    20,000 lb. Planetary Winch with Spring Tensioner Hydraulic Pump
    1/4" Tread Plate Deck Mud Flaps
    Two Front Safety Chains Federal Standard 108 Lighting
    Hydraulic Winch & Cable  


    Hydraulic Dock Stabilizer Window guard in the Cab Protector
    Combination Wheel Lift & Dock Stabilizer Tri-Box Toolboxes
            (For Frame Mounted Pylon)
    Removable Side Rails Locking Chain Rack
            (For Body Mounted Cab Protector)
    Rub Rails (Trailer Style with Integrated Stake Pockets) Switch Panel
    Tool Compartments Work Area & Emergency Lighting
    PTO Optional Color on Top of Deck & Side Rails
    Smooth Floor in Lieu of Tread Plat Wired or Wireless Winch Remote
    Apitong Wood Floor 30,000 lb. Planetary with
            Spring Tensioner (30 Series Only)
    Rumber Flooring Trailer Ball kit for the
                       Optional Wheel Lift
    Additional Key Slots Fork Holders & Lift Forks for
                       the Optional Wheel Lift
    Dual Key Slots Down Center or Deck Edge Pintle Hook or Hitch Adapter for
             the Optional Wheel Lift
    Bed Mounted Cab Protector  
    Frame Mounted Pylon
    (Requires 8" Additional CA)

    Print Product Brochure


    Tow Rating 20,000 lbs. 30,000 lbs.


    30 SERIES
    40 SERIES
    Load Rating 30,000 lbs. 40,000 lbs.
    Platform Length 26', 27', 28', 29', 30' 26', 27', 28', 29', 30'
    Platform Floorplate Thickness 1/4" 1/4"
    Platform Width (Outside) 102" 102"
    Platform Width (Inside)* 97" 97"
    Platform Mainbeam 8" I-Beam 8" I-Beam (reinforced)
    Platform Crossmembers 3" x 3" Cor-ten Steel 3" x 3" Cor-ten Steel
    Crossmember Spacing 8" On Center 8" On Center
    Platform Sides 7" x 4" x 3/8" Angle 7" x 4" x 3/8" Angle
    Subframe Rails 6" x 3" x 3/8" H.S. Tube 6" x 3" x 1/2" H.S. Tube
    Rear Pivot 1 Piece 2" Diameter 1 Piece 2" Diameter
    Winch (1st Layer) 20,000 lb. Planetary 20,000 lb. Planetary
    Cable 9/16" x 75' 9/16" x 75'
    Bed Tilt Cylinders 4 1/2" Bore 4 1/2" Bore
    Bed Extension Cylinders 4" x 120" Stroke 4" x 120" Stroke
    Wheel Lift Rating (Extended) 6,000 lbs. 10,000 lbs.
    Tow Rating 20,000 lbs. 30,000 lbs.
    Deck Height above Truck Frame(steel) 6 1/4" 6 1/4"
    * Inside Bed Width Applies to Optional Removable Rails


    The LCG Carrier Requires Super Single Tires & Wheels, 445/50R 22.5 with at least 58"
    between the tire sidewalls (interior).

    Fuel Tanks must be under cab, not to extend more then 12" behind the cab. Fuel fill must
    not be behind the cab.

    The preferred location for the battery box is under the passenger seat, battery boxes in
    other locations may require relocation.
    Air bag rear suspension is recommended.
    Minimum Frame Length Behind Center of Rear Axle 60"
    Minimum Frame Height 40.5"
    Maximum Frame Height 44"
    30 & 40 SERIES TANDEM AXLE                    30 SERIES                           40 SERIES
    Minimum GVWR 50,000 lbs. 56,000 lbs.
    Minimum Frame RBM (Each Rail) 3.0 Million Inch Pounds 3.0 Million Inch Pounds
    Minimum Cab to Bogie (clear ‡)
    26' 174" 174"
    27' 182" 182"
    28'* 190" 190"
    29'* 198" 198"
    30'* 206" 206"
    ‡ The outside frame rails of the chassis extending behind the cab must be free of fuel tanks,
        air tanks, battery boxes, exhaust racks, etc.
    * Check state and local road restrictions for maximum vehicle lengths allowed.
    NOTE:  All ratings are based on structural factors only, not vehicle capacities or capabilities.
    Specifications shown are approximations and may vary depending on chassis selected.
    Platform rating is based on an equally distributed load. Actual payload carrying capacity is
    determined by the curb weight of the chassis and equipment and should not exceed the
    GVWR of the Chassis.
    Miller Industries Towing Equipment Inc. reserves the right to change or modify product and/or specifications without notice or obligation.  Some equipment shown is optional.



    Contact Your Sales and Service Representatives at
    1-662-280-6761 M-F 8AM - 5PM CST.
    Toll Free 1-866-280-6761 - Fax 1-662-280-6875

    Contact Your Sales Representatives   For Your Parts and Service Representative