Print Product Brochure

    Century has brought a whole new dimension to transport with the 12 Series LCG™ (Low Center of Gravity) carrier.  The patent-pending design lowers the deck height 5 to 6 inches over conventional carriers. The lower height allows for the transport of taller loads, such as forklifts or man-lifts, that may be over-height on a conventional carrier and also provides better stability during transport. The operator can easily secure loads or tie down vehicles standing on the ground, thanks to the lower height. When mounted on most air ride chassis, with the air dumped, the 12 Series LCG™ has less than an 11-degree load angle, making it ideal for loading low-clearance vehicles or equipment without using ramps or wood. For fast and easy unloading of damaged vehicles or equipment, the 12 Series LCG™ has a 20-degree dump angle. Your new 12 Series LCG™ is available in 21', 21 1/2 ' and 22' deck lengths with a capacity of 12,000 pounds and a wide variety of options to fit your specific transport needs.



    Platform Available in Aluminum or Steel 11 Key Slot Package (Steel)
    Floor Level Sides w/Stake Pockets (Steel) 4 Key Slot Package (Aluminum)
    Tri-Hollow Tube Rails (Aluminum) Full Length Slide Pads
    Right and Left Chain Trays Bed Anti-tilt Lockout
    Safety Chains  (2 front, 2 rear) Positive Lock-Down
    Painted in Black Acrylic Enamel  (Steel Only) Two Lift Cylinders
    Left & Right Side Illuminated Controls One Extension Cylinder
    Federal Standard #108 LED Lighting Winch Clutch Release
    8,000-lb. Hydraulic Winch w/50' Cable Back-Up Lights & Alarm
    Full Function Wheel Lift System Cable Tensioner
    Slide-In L-Arms With Anti-Theft Storage Cable Roller Guide
    Pre-Wired Electrical Junction Box Tow Light Socket
    Adjustable Rear Stabilizer Mud Flaps
    Bed Built 102" Wide Hydraulic Pump


    Frame-Mounted Headboard   (Requires 6" Additional CA)
    Tribox Frame-Mounted Headboard   (Requires 8" Additional CA)
    Optional Color on Top of Deck and Side Rails (Steel)
    Smooth Floor in lieu of Tread Plate Bed-Mounted Headboard
    Solid Tube Side Rails (Steel, N/C) Aluminum Overlay Rails (Steel)
    Solid Narrow Profile Rails (Aluminum, N/C) Galvanized Subframe
    Steel Removable Tube Rails SP 8000 Sidepuller
    Aluminum Removable Tube Rails 8 Key Slot Package (Aluminum)
    Aluminum Removable Blade Rails Additional Key Slots
    Wired or Wireless Winch Remote Wood Floor
    Steel or Aluminum Tool Compartments Rumber Flooring
    Work Lights (Rear, Pylon or Winch-Mounted) PTO
    Various Chain & Strap Assemblies Switch Panel
    Century's 3-Way Pivoting L-Arm System Emergency Lighting
    Dock Stabilizer in lieu of Wheel Lift Auto-Grip Wheel Lift
    9,000-lb. or 12,000-lb. Planetary Winch Side Mount Winch
    SST™ option Print Product Brochure


    Load Rating * 12,000 lbs
    Platform Length 21', 21 1/2', 22'
    Platform Floorplate Thickness 3/16"
    Platform Width (Outside) 102"
    Platform Width (Inside) ** 96.5" or 101"
    Platform Mainbeam 6" I-Beam
    Platform Crossmembers (Steel) 2" x 2" Cor-ten Tube
    Platform Crossmembers (Aluminum) 2 1/4"
    Crossmember Spacing (Steel) 8" On Center
    Crossmember Spacing (Aluminum) 4" On Center
    Subframe Rails 5" x 3" x 5/16" H.S. Tube
    Rear Pivot 1 Piece 1 1/2" Diameter
    Winch (1st Layer) 8,000 lb. Worm
    Cable 3/8" x 50'
    Bed Tilt Cylinders 3" Bore
    Bed Extension Cylinders 3 1/2" x 120" Stroke
    Wheel Lift Reach at Full Extension 68"
    Wheel Lift Rating (Extended) 3,500 lbs.
    Tow Rafting 10,000 lbs.
     *  Platform rating is based on equally distributed load.
    ** Inside Bed Widths will vary based on Siderail Option


    Fuel tanks must be under the cab.  Fuel tanks can extend up to 6 inches behind the cab only in combination with a frame mounted pylon.    Fuel fill must not be behind the cab.
    The preferred location for the battery box is  under the passenger seat or under the cab, battery boxes in other locations may require relocation. 
    Minimum Frame Length Behind Center of Rear Axle 36"
    Minimum Frame Height 33"
    Maximum Frame Height 38"
    Wheel & Tire Size 19.5
    GVWR 19,500 lbs. - 26,000 lbs.
    Minimum Frame RBM (Each Rail) 600,000 Inch Pounds
    Minimum Cab to Axle (Clear)  
         21' * 138"
         21 1/2' 144"
         22' 150"
     A minimum of 49" between the inside of the rear tires is required.
     ‡ The outside frame rails of the chassis extending behind the cab must be free of fuel tanks, air tanks, exhaust stacks, etc.

    The LCG™ carrier is not compatible with chassis that have inboard mid-ship fuel tanks such as the Ford 550, GM 5500, and Dodge 5500.

    Air-bag rear suspensions are recommended for the lowest possile load angle but the LCG™ carrier can be mounted on some chassis with leaf spring suspensions.  Most chassis components behind the cab outside the frame must be at least 2 inches below the top of the truck frame to clear the bed slide rails. 

    NOTE:  All ratings are based on structural factors only, not vehicle capacities or capabilities. Specifications shown are approximations and may vary depending on chassis selected. Platform rating is based on an equally distributed load. Actual payload carrying capacity is determined by the curb weight of the chassis and equipment and should not exceed the GVWR of the Chassis. Miller Industries Towing Equipment Inc. reserves the right to change or modify product and/or specifications without notice or obligation.  Some equipment shown is optional.

    Click here to view this product's brochure


    Contact Your Sales and Service Representatives at
    1-662-280-6761 M-F 8AM - 5PM CST.
    Toll Free 1-866-280-6761 - Fax 1-662-280-6875

    Contact Your Sales Representatives   For Your Parts and Service Representative