Product Brochure

    20 Series


    Full Length Subframe Positive lock down system
    Full Length Subframe Wear Pads Dual illuminated controls
    Painted with Black Acrylic Urethane Back-up alarm
    Driver's & Passenger Side Chain Trays Hydraulic Pump
    Hydraulic Dock Stabilizer Mud Flaps
    7 Tie-Down Points (2 Front, 5 Rear) Federal Standard 108 Lighting
    Floor Level Sides with Stake Pockets 12,000 lb. planetary winch
    Two Front Safety Chains 3/16” deck plate
    Bed anti-tilt feature L.E.D. lights
    Dual tilt cylinders Manual clutch winch release
    Dual bed extension cylinders Cable tensioner


    Combination Wheel Lift & Dock Stabilizer
                      - 4,000 lb. wheel lift
    Window Guard in the Cab Protector
    Combination Wheel Lift & Dock Stabilizer
                      - 6,000 lb. wheel lift (requires rear axle)
    Tri-box toolboxes (for frame mounted pylon) - (requires additional CA)
    Removable Side Rails Locking Chain Rack (for bed mounted cab protector)
    Rub Rails (Trailer Style w/Integrated Stake Pockets) Switch Panel
    Tool Compartments Work Area & Emergency Lighting
    PTO Optional Color on Top of Deck & Side Rails
    Smooth Floor in Lieu of Deck Plate Wired or Wireless Winch Remote
    1/4" Steel Floor (Smooth or Deck Plate) 15,000 lb. Planetary Winch
    Apitong Wood Floor 20,000 lb. Planetary Winch
    Rumber Flooring Winch Air Clutch release for 12,000, 15,000 and
                        20,000 lb. Winches
    Additional Key Slots Galvanized Subframe       
    Dual Key Slots Down Center of Deck Trailer Ball kit for the Optional Wheel Lift
    Bed Mounted Cab Protector Fork Holders & Lift Forks for
                         the Optional Wheel Lift
    Frame Mounted Pylon  (Requires 6, 8 or 12" Additional CA depending on pylon choice)  Pintle Hitch Adapter for the Optional Wheel Lift
      Print Product Brochure 


    Load rating   20,000 lbs
    Body Length   24', 25', 26', 27', 28', 29', 30'
    Body Floorplate Thickness   3/16"
    Body Width (Outside)   102"
    Body Width (Inside)*   97"
    Body Mainbeam   6" I-Beam
    Crossmembers   3"x 3" Corten Tube
    Crossmember Spacing   8" On Center
    Body Sides   6" x 4" x 3/8" Angle
    Subframe Rails   5" x 3" x 1/2" H.S. Tube
    Subframe Hinge   1 Piece 2" Diameter
    Cable 12,000 lb. Winch
     15,000 lb. Winch
     20,000 lb. Winch
    7/16 x 50'
     1/2 x 50'
     9/16 x 75'
    Bed Tilt Cylinders   4" Bore
    Bed Extension Cylinders (2)   3 1/2" x 120" Stroke
    Wheel Lift Ratings 4,000  6,000
    Lift Rating Extended 4,000 lbs. 6,000 lbs.
    Tow Rating 10,000 lbs. 20,000 lbs.
    * Inside Bed Width Applies to Optional Removable Rails


    Fuel tanks must be under cab and not to extend behind front of the bed. Fuel fill must not be behind cab.

    The preferred location for the battery box is under the passenger seat or under the cab. Battery boxes in other locations may require relocation.

    Chassis components directly behind the cab must be 2 inches below the top of the truck frame to clear the bed rails. Air tanks in the tilt cylinder zone will need to be relocated.

    *Minimum space of 49” required between the inside tires. With larger tire size of 275, 11R and above, aluminum inside wheels are required.

    Air-bag rear suspension is recommended for lower load angle.
    Minimum Frame Height 38"
    Maximum Frame Height 43"
    Minimum GVWR 31,000 lbs.  
    Minimum Frame RBM (Each Rail)    
    24 - 28' 1.8 Million Inch Pounds  
    29 - 30' 2.1 Million Inch Pounds  
    Minimum Cab to Axle (clear )**   (with Lift Axle)
    24' 166" 174"
    25' 170" 178"
    26' 182" 190"
    27' 194"  
    28' 206"  
    Minimum Frame Length Behind Center of Rear Axle 34"  
    Minimum GVWR 50,000 lbs.  
    Minimum Frame RBM (Each Rail) 2.5 Million Inch Pounds  
    Minimum Cab to Bogie (clear )**    
    26' 174"  
    27' 182"  
    28' 190"  
    29' 198"  
    30' 206"  
    Minimum Frame Length Behind Center of Rear Axle 54"  
    **Use back of vertical exhaust for the usable CA and effective back of cab.

    Print Product Brochure

    NOTE:  All ratings are based on structural factors only, not vehicle capacities or capabilities.
    Specifications shown are approximations and may vary depending on chassis selected.
    Platform rating is based on an equally distributed load. Actual payload carrying capacity is
    determined by the curb weight of the chassis and equipment and should not exceed the
    GVWR of the Chassis.
    Miller Industries Towing Equipment Inc. reserves the right to change or modify product and/or specifications without notice or obligation.  Some equipment shown is optional.


    Contact Your Sales and Service Representatives at
    1-662-280-6761 M-F 8AM - 5PM CST.
    Toll Free 1-866-280-6761 - Fax 1-662-280-6875

    Contact Your Sales Representatives   For Your Parts and Service Representative



    Email  Parts@Wrecker-Sales.com

    or Dale@Wrecker-Sales.com