With the success of the SP8000™ side puller many operators asked us to design a larger model for Med duty wreckers and Carriers. We listened and designed the SP12,000™. The SP12,000™ is a completely new design, we did not take the easy way out and just stick a larger winch in the SP8000™ platform. Our designers spent over a year testing and designing the SP12,000™. Check out one of fastest growing product lines 
    in the SP Series the SP12,000™.
     - 2010 UPDATES FOR THE SP12,000 -
    • New valve body with diverter valve.
    • Manual overrides on the valve body.
    • Weather pack connectors on the wiring harness with L.E.D. indicators at each solenoid.
    • Spring Tubes aka rocket launchers, foot pins are all zinc plated with yellow chromate finish.
    • Large gusset are redesigned to allow tighter cab to axle spacing.




     


    SP12,000 & 
    WreckMaster
    Hydraulic Plumbing Schematic

    Hydraulic Plumbing Schematic for 2009 or later models


    The SP12,000 is specifically designed for use on chassis with a minimum GVWR of 29,0000 lbs.

    The SP12,000 Comes with its own hydraulic system pre plumbed and wired. Our preinstalled valve body has a power beyond port helping to make installation a snap. You can see plumbing diagram in our Operators manual.

    The SP12,000 comes with a full function wired remote control that is pre wired, all you need to provide is a fused 12 volt power supply. The wired remote control operates the stabilizer legs, winch, and winch free spool.

    The SP12,000 comes with 8 well thought out and tested anchor points on the Side Puller. The anchor points are a great spot to install a snatch block to use as a direction change or simply a point to terminate the hook on the wire rope in a 2 part lay up.

    The SP12,000 comes with a removable outer boom head. By allowing you the operator to decide whether to pull from the center boom head or to install the removable boom head; we have given you more choices in pulling direction then any other model in the industry.

    The SP12,000 Comes with stabilizer feet that offer both a pavement pad and grouser in a simple to use flip out design. The flipper foot also incorporates a low pulling point to attach a snatch block giving you the ultimate in low pulling options.

    The SP12,000 comes in a ready to paint PPG brand primer finish giving you the option to color match the SP to your tow truck.

    The SP12,000 comes with a 12,000 lb Planetary Drive High Speed winch. Also included are a winch line tensioner, 100 ft of 7/16” wire rope and easy access free spool release.

    The SP12,000 hydraulic stabilizer legs have internal lock valves that prevent the leg from retracting in the event of a hose failure offering you added safety.

    The SP12,000 comes with a comprehensive operations manual and detailed installation procedures.

     

    SP12,000 RATINGS

    Boom

    12,000 lbs.

    Winch

    12,000 lbs.

    Stiff Leg

    12,000 lbs.

    STANDARD FEATURES

    12,000 lb. Planetary Winch

     Eight Tie-Back Points

     Winch Tensioner & 
    Manually Operated Free-Spool

     Center Pivoting Boom Head

    Hydraulic Stiff Legs

     Removable Outer Boom Head

     Full function Wired Remote with 20' Cord  Primer Finish

    Flipper Foot Spades

     Wire Rope - 7/16" x 100'

    OPTIONAL FEATURES

    Lightbar Mount

     Wireless Winch Control

    CHASSIS RECOMMENDATION

    Chassis GVRW Class 7 26,001 lbs. - 33,000 lbs.

    Additional Cab to Axle Recomended (Carriers)

    17"

    Additional Cab to Axle Recommended (Wreckers)

    19"

    Frame Height

    36" - 40"

    All ratings are based on structural factors only, not vehicle capabilities.  Specifications shown are approximations and may vary depending on chassis selected.  Miller Industries Towing Equipment Inc reserves the right to change or modify product and or specifications without notice or obligation.  Some equipment shown is optional.  SP Series of side pullers is Patented under US Patent No. 7,950,892

    Click here for Operations Manual

    Front Picture

    Back Picture

    Print PDF Version Print PDF Version

       

    Contact Your Sales and Service Representatives at
    1-662-280-6761 M-F 8AM - 5PM CST.
    Toll Free 1-866-280-6761 - Fax 1-662-280-6875
     

    Contact Your Sales Representatives   For Your Parts and Service Representative

    Jeff@Wrecker-Sales.com

     

    Email  Parts@Wrecker-Sales.com

    or Dale@Wrecker-Sales.com