V-100
    .

    Click here to view this product's brochure


    Innovation in Heavy-Duty Integrated
    Towing and Recovery Equipment

     

    Almost two decades ago, Vulcan became a pioneer in the heavy-duty integrated towing and recovery market with the introduction of the Vulcan 940 and the continued it's advancement in equipment technology with the Vulcan 3025.  The V-100 is just one more example of Vulcan's continued pursuit in providing the most innovative equipment to meet the demands of professional heavy-duty operators.
    Stainless steel tool compartments with keyless entry, 2-speed winches, the Euro-lift stinger with a 144" of reach and a 3-stage recovery boom providing over 25 feet of boom elevation are just a few of the many standard and optional features that have continued Vulcan's legacy as the innovator....not the imitator.
     

    STANDARD BODY FEATURES

     96" Wide Aluminum Modular Body  Remote Keyless Lock/Unlock for Toolboxes
     Dual Control Stations with Direct Link
     Activated Levers
     Full 15 Function Remote Lanyard Controls
     (passenger side)
     Underlift In-Cab Controls  9-Way Switch Panel
     Dual Pressure Gauges  Independent Hydraulic Rear Spades
     Pavement Pads
     (n/a with Flipper Feet Opt.)
     Lower Work Lights
     Mud Flaps  Tailboard Fork & Chain Storage
     Fork Holders  Safety Chains in Rear Pockets
     2 Section Hydraulic Pump  Light Pylon 
     Tailboard D-Rings  LED Lighting
     Aluminum Tread-Plate Walkway  LED Toolbox Lighting
     Adjustable Shelves  Dual Chain Racks
     Air & Electrical Hook-UP  Rubber Isolators for Body Mounting
     Wireless Remote Control  

    STANDARD BOOM FEATURES

     Power Elevation  Power Extension
     Dual Hydraulic Winches  Air Cable Tensioners
     Air Free Spool   360° Sheave Head
     Cable Tie Backs  Tailboard Recovery Anchors
     Spherical Bearings in Main Boom Pivot  Single Grease Fitting for Lubrication of
     Inner Boom Top Pad

    STANDARD UNDERLIFT FEATURES

     Power Elevation & Extension  Hydraulic Fold
     Patented Power Tilt  3-Stage Design
     1 Piece Pivot Pin  Upper/Lower Thrust Washer
     Low Profile Crossbar  70° Pivoting Crossbar
     6 Pairs of Lifting Attachments  1 Pair Hook Adapters
     Low Profile Fork Receivers  High Stands
     1 Pair Spring Lift Adapters  King Pin Lifting Plate

    OPTIONAL EQUIPMENT

     Air Shift PTO  Multi-Positional Flipper Feet
     Heavy Duty Tire Lift  Tire Lift Storage Brackets
     Chain Hook Slide Adapter  Pintle Hook Attachment
     5th Wheel Plate
     (requires pintle hook attachment)
     King Pin Attachment
     (requires pintle hook attachment)
     Trailer Ball Adapter
     (requires pintle hook attachment)
     Additional Lift Forks
     Underlift Light Kit  Additional Lighting
     Boom Angle Indicator  Chain Package
     Endless Loop Sling Package  Screw Pin Shackle Kit
     Side Work Lights  Power Touch System
     Tailboard Underlift Controls  3 or 7 Drawer Toolbox
     Washdown Sink  Engine Data Info Center
     Snatch Blocks  Wide Load Light Bar
     Rear Camera & Monitor  Navigation System & Rear Camera
     Convenience Groups  Aluminum Dress-Up Kits
     Installation    

    BOOM SPECIFICATIONS

     V-100    
     Boom Structural Rating (S.A.E.) Retracted 30° Extended 30°
      100,000 lbs. 35,000 lbs.
     Maximum Angle  35°
     Maximum Hook Height (inches)  248"
     Reach Past Tailboard at
     Minimum Boom Angle (inches)
     140"
     V-100 - 3-Stage    
     Boom Structural Rating (S.A.E.) Retracted 30° Extended 30°
      100,000 lbs. 18,000 lbs.
     Maximum Angle  35°
     Maximum Hook Height (inches)  304"
     Reach Past Tailboard at
     Minimum Boom Angle (inches)
     236"

    UNDERLIFT SPECIFICATIONS

     V-100  
     Capacity Fully Extended
     to C.L. of Forks
     18,000 lbs. @ 116"
     Capacity Fully Retracted
     to C.L. of Forks
     55,000 lbs. @ 67"
     Underlift Tilt  12° +    6° -
     V-100 - w/EuroLift  
     Capacity Fully Extended
     to C.L. of Forks
     18,000 lbs. @ 144"
     Capacity Fully Retracted
     to C.L. of Forks
     55,000 lbs. @ 67"
     Underlift Tilt  12° +    6° -
    WINCH SPECIFICATIONS
     Winch Capacity  (2) 50,000 lbs.
     Winch Type  Planetary 2-Speed
     Cable Specifications  3/4" x 250' 6x37 I.W.R.C.

    BODY SPECIFICATIONS

     V-100 - Tandem Axle  
        Common Body Configuration  160" C.B.
        Additional  Body Configurations  180" / 200" / 220" C.B.
     V-100 - Tri Axle  
        Common Body Configuration  180" C.B.
        Additional  Body Configurations  200" / 220" C.B.

    CHASSIS RECOMMENDATION

      Front Axle (lbs.)  14,600
      Rear Axle (lbs.)  40,000
      Clear C.A. or C.B.  156" to 200" C.B.
      After Frame from Center of Rear Axle  36"
      R.B.M. (in./lbs.)  3,000,000                     
     
     NOTE:  Some optional equipment may be shown.  Other Vulcan Towing and Recovery Equipment is available from your local Vulcan Distributor.
     
     NOTE:  Ratings are based on structural factors only - not chassis capacity.  All chassis specifications are minimums, heavier specifications may be required depending on chassis and equipment weights.  Vulcan reserves the right, without notice and without obligation, to improve or modify products, which may change the specifications, models and featureavailability.

    Click here to view this product's brochure

       

    Contact Your Sales and Service Representatives at
    1-662-280-6761 M-F 8AM - 5PM CST.
    Toll Free 1-866-280-6761 - Fax 1-662-280-6875
     

    Contact Your Sales Representatives   For Your Parts and Service Representative

    Jeff@Wrecker-Sales.com

     

    Email  Parts@Wrecker-Sales.com

    or Dale@Wrecker-Sales.com