V-70
    .
    Click here to view this product's brochure


    Innovation in Heavy-Duty Integrated
    Towing and Recovery Equipment

      

    For the right mix of power, performance and value, Vulcan's V-70 is the intelligent choice for heavy duty integrated towing and recovery equipment.  Vital components are fabricated from high yield steel to minimize weight to allow for more legal payload while maximizing strength and durability.  The hydraulic components are engineered at the heart of the unit to provide the power to the winches, boom and underlift to handle the most demanding jobs.  The patented double action tilt system is just one of the features that exemplifies Vulcan's superior design with the ability to tilt a full 16,000 lbs. under load.  At Vulcan, we believe that your equipment  is only as good as its weakest component, so we take a total design approach to assure your  V-70 is the most intelligent choice you can make for years of trouble free service.
     

    STANDARD BODY FEATURES

     96" Wide Aluminum Modular Body  Remote Keyless Lock/Unlock for Toolboxes
     Dual Control Stations with Direct Link
     Activated Levers
     Full 15 Function Remote Lanyard Controls
     (passenger side)
     Underlift In-Cab Controls  9-Way Switch Panel
     Dual Pressure Gauges  Independent Hydraulic Rear Spades
     Pavement Pads
     (n/a with Flipper Feet Opt.)
     Lower Work Lights
     Mud Flaps  Tailboard Fork & Chain Storage
     Fork Holders  Safety Chains in Rear Pockets
     2 Section Hydraulic Pump  Light Pylon 
     Tailboard D-Rings  LED Lighting
     Aluminum Tread-Plate Walkway  LED Toolbox Lighting
     Adjustable Shelves  Dual Chain Racks
     Air & Electrical Hook-UP  Rubber Isolators for Body Mounting

    STANDARD BOOM FEATURES

     Power Elevation  Power Extension
     Dual Hydraulic Winches  Air Cable Tensioners
     Air Free Spool   360° Sheave Head
     Cable Tie Backs  Tailboard Recovery Anchors
     Spherical Bearings in Main Boom Pivot  Single Grease Fitting for Lubrication of
     Inner Boom Top Pad

    STANDARD UNDERLIFT FEATURES

     Power Elevation & Extension  Hydraulic Fold
     Patented Power Tilt  3-Stage Design
     1 Piece Pivot Pin  Upper/Lower Thrust Washer
     Low Profile Crossbar  70° Pivoting Crossbar
     6 Pairs of Lifting Attachments  1 Pair Hook Adapters
     Low Profile Fork Receivers  High Stands
     1 Pair Spring Lift Adapters  King Pin Lifting Plate

    OPTIONAL EQUIPMENT

     SP 20000  Air Shift PTO
     Heavy Duty Tire Lift  Multi-Positional Flipper Feet
     Chain Hook Slide Adapter  Tire Lift Storage Brackets
     5th Wheel Plate
     (requires pintle hook attachment)
     Pintle Hook Attachment
     Trailer Ball Adapter
     (requires pintle hook attachment)
     King Pin Attachment
     (requires pintle hook attachment)
     Underlift Light Kit  Additional Lift Forks
     Boom Angle Indicator  Additional Lighting
     Endless Loop Sling Package  Chain Package
     Wireless Remote Control  Screw Pin Shackle Kit
     Power Touch System  Side Work Lights
     3 or 7 Drawer Toolbox  Tailboard Underlift Controls
     Engine Data Info Center  Washdown Sink
     Wide Load Light Bar  Snatch Blocks
     Navigation System & Rear Camera  Rear Camera & Monitor
     Aluminum Dress-Up Kits  Convenience Groups
     Installation    

    BOOM SPECIFICATIONS

     Boom Structural Rating (S.A.E.) Retracted 30° Extended 30°
      70,000 lbs. 28,000 lbs.
     Maximum Angle  35°
     Maximum Hook Height (inches)  233"
     Reach Past Tailboard at
     Minimum Boom Angle (inches)
     130"

    UNDERLIFT SPECIFICATIONS

     V-70  
     Capacity Fully Extended
     to C.L. of Forks
     16,000 lbs. @ 116"
     Capacity Fully Retracted
     to C.L. of Forks
     35,000 lbs. @ 60"
     Underlift Tilt  12° +    6° -
     V-70 - w/EuroLift  
     Capacity Fully Extended
     to C.L. of Forks
     16,000 lbs. @ 144"
     Capacity Fully Retracted
     to C.L. of Forks
     55,000 lbs. @ 67"
     Underlift Tilt  12° +    6° -
    WINCH SPECIFICATIONS
     Winch Capacity  (2) 35,000 lbs.
     Winch Type  Planetary (2 Speed Optional)
     Cable Specifications  3/4" x 200' 6x37 I.W.R.C.

    BODY SPECIFICATIONS

     V-70 - Tandem Axle  
        Common Body Configuration  160" C.B.
        Additional  Body Configurations  180" / 200" / 220" C.B.
     V-70 - Tri Axle  
        Common Body Configuration  180" C.B.
        Additional  Body Configurations  200" / 220" C.B.

    CHASSIS RECOMMENDATION

      Front Axle (lbs.)  13,200
      Rear Axle (lbs.)  40,000
      Clear C.A. or C.B.  156" to 200" C.B.
      After Frame from Center of Rear Axle  36"
      R.B.M. (in./lbs.)  2,250,000                     Print Product Brochure
     
     NOTE:  Some optional equipment may be shown.  Other Vulcan Towing and Recovery Equipment is available from your local Vulcan Distributor.
     
     NOTE:  Ratings are based on structural factors only - not chassis capacity.  All chassis specifications are minimums, heavier specifications may be required depending on chassis and equipment weights.  Vulcan reserves the right, without notice and without obligation, to improve or modify products, which may change the specifications, models and feature availability.