|
|
 |
 |
 |
 |
|

.
Standard Equipment Optional
Equipment Specifications
Chassis Recommendations Cab To Axle
Back to
Product Line
|
|
"BUILT
TO TAKE IT" |
|
With the increased demand for heavier payloads and a larger number of heavier GVW chassis
being used in the towing industry today, Vulcan saw the need to design and build a series
of quality carriers with the strength and durability to stand up to those demands.
The Vulcan 15 Series carrier is designed for a chassis in the 25,500 to 28,00 lb. GVW
range with 22.5 tires. The steel deck is available in 19', 21' or 22' lengths with
removable side rails standard. The Vulcan 15 Series is also available with a
hydraulic dock stabilizer in lieu of the standard independent hydraulic wheel lift for
industrial applications. Call 1-800-489-2401 for more information on the 15 Series
or the complete line of Vulcan quality towing and recovery equipment.
Note: Some optional equipment may be shown.
|
VULCAN 15 SERIES CARRIERS - STANDARD EQUIPMENT |
| Safety Chains |
Tool Compartment (Left Hand Side with
Key) |
| Platform Available in Steel |
Left and Right Side Chain Trays |
| Front and Rear Tie-Down Slots |
8,000 lb. Hydraulic Winch with 50' of
3/8" Cable |
| Full-Length Nylatron Slide Pads |
Bed Anti-Tilt Feature |
| Back-Up Alarm |
Vulcan Mud Flaps |
| Consolidated Tilt and Mounting Frame |
Two Power Lift Cylinders |
| One Extension Cylinder |
Positive Bed Lock-Down System |
| Left and Right Hand Illuminated
Controls |
Back-Up Lights |
| Federal Standard #108 Lighting |
Winch Clutch Release |
Hydraulic Independent Wheel Lift
System
with Slide-In L-Arm System |
Wheel Lift Safety Pin |
| Hydraulic Pump |
Winch Guide Rollers |
| Winch Cable Tensioner |
All Components for Complete
Installation |
| Pre-Assembled and Factory Tested |
Full Height Steel Headboard |
| Steel Beds Painted in Black Acrylic
Enamel |
Removable Side Rails |
VULCAN 15 SERIES CARRIERS - OPTIONAL EQUIPMENT |
| Vulcan Strapless Wheel Lift Hook-Up System
|
102" Wide Body |
| Additional Key Slots |
Right Side Tool Compartment |
| Planetary Winch in lieu of Worm Gear Winch |
V-Chain Assembly |
| Work Lights |
Switch Panel |
| Wrecker Special Light |
Factory Installation |
| Tie-Down Chain Assembly |
Trailer Ball Adapter for Wheel Lift |
| Wood Floor |
Smooth Floor in lieu of Diamond Plate |
| Optional Color on Side Rails & Top of
Deck |
Additional Crossmembers |
| Dock Stabilizer in lieu of Wheel Lift |
Many other Popular Vulcan Options |
VULCAN
15 SERIES CARRIERS - SPECIFICATIONS |
| Platform Length |
19',
21', or 22' |
| Load Rating: |
15,000
lbs. * |
| Platform Thickness: |
3/16" Floor Plate |
| Crossmembers |
2"
x 4" on 8" Centers |
Platform Width:
|
Inside Rails
Overall |
91
1/2"
95 1/2" |
| Platform Extension: |
108" |
| Controls: |
5 Spool
Mono-Block Valve |
| Winch: Rating (1st layer) |
8,000
lbs. |
| Cable: |
Diameter & Length
Type
Working Line Limit |
3/8" x 50 ft.
6 x 19 IPS
3,500 lbs. |
| Wheel Lift Rating at Full Extension: |
3,500
lbs. |
| Tow Rating at Full Extension: |
6,250
lbs. |
All Ratings Specified are Based on Structural
Factors Only - Not Vehicle Capability.
* Platform Rating is Based on Equally Distributed Load. |
VULCAN 15 SERIES CARRIERS - CHASSIS RECOMMENDATIONS |
Minimum G.V.W.
Maximum G.V.W.
Mounting Frame Width
Tire Size
Minimum Height from Ground to Top of Frame Rail
Maximum Height from Ground to Top of Frame Rail |
25,500
lbs.
28,000 lbs.
34-3/4"
22.5
40"
44" |
VULCAN 15 SERIES CARRIERS - CAB TO AXLE |
19'
21'
22' |
120"
144"
156" |
|
Note: Specifications subject to change without notice. All
ratings specified are based on structural factors only, not vehicle capacities or
capabilities.
|
|
|
|
|
Contact Jeff Ingram, Sales and
Service Representative at
1-662-280-6761 M-F 8AM - 5PM CST.
Toll Free 1-866-280-6761 - Fax 1-662-280-6875
Email Us Anytime
Jeff@Wrecker-Sales.com
|
|
|
|
 |
 |
 |