|
|
 |
|
|
|
|
 .
Standard Features Optional Equipment Specifications
Accessories Chassis
Recommendations Back to Product Line
|
Note: Some optional equipment
may be shown. |
VULCAN
SERIES 30 INDUSTRIAL CARRIERS - STANDARD FEATURES |
| Full length
subframe |
Mud flaps |
| Fixed
position stabilizer |
Illuminated
dual controls |
| Federal
standard 108 shock mounted lighting |
Four side
marker lights |
| Water
resistant junction box for wire harness connection |
Body
lock |
Body
- 1/4 smooth floor plate (steel floor)
- 5 x 2 structural tube crossmembers on 8"
centers
- Floor level sides with stake pockets
- Heavy duty approach plate with 4 chain locks |
Lubrication fittings on all pivot points |
VULCAN SERIES 30 INDUSTRIAL CARRIERS - OPTIONAL EQUIPMENT |
| 3/16
or 1/4 diamond tread floor |
Hydraulic
rear stabilizer |
| 5/4
Apitong (wood floor) |
8
cu. ft. water resistant aluminum tool box |
| Steel
floor overlay on wood (not recommended) |
4
cu. ft. aluminum tool box with shelf |
| Additional
chain locks |
Factory
installation |
| 20,000 lb. hydraulic winch with 5/8 x 100 ft. cable |
Bi-directional
shaft-driven pump - 28 or 18 GPM |
| 30,000 lb. hydraulic winch with 11/16 x 100 ft. cable |
Direct
mount pump/PTO |
| NOTE: Some option selections may not be compatible in certain
configurations. |
VULCAN SERIES 30 INDUSTRIAL CARRIERS - SPECIFICATIONS |
Body Width
Body Extension |
96 O.D. x 102
O.D.
120" |
Control Valve
Oil Reservoir
Oil Filter
Pump |
Sectional, 20 GPM, 2000 PSI
26 gallons
250 PSI, 30 GPM, 10 Microns
18 or 28 GPM |
Body Rating *
Minimum Load Angle ** |
30,000 lbs. evenly distributed
14° at 42" frame height |
* Load ratings are based on structural factors
- not chassis capability
** Load angle varies with frame height and carrier length. Lower frames and
longer carriers will
produce lower load
angles.
|
VULCAN
SERIES 30 INDUSTRIAL CARRIERS - ACCESSORIES |
| Bar light |
Work lights |
Switch panel |
| Hydraulic throttle |
Wire control throttle |
J-hook chains |
| Front hookup chain |
|
|
VULCAN SERIES 30 INDUSTRIAL CARRIERS - CHASSIS RECOMMENDATIONS |
| Minimum GVWR - 50,000 lbs. * |
Accessible PTO opening |
| Maximum frame height - 44" |
Minimum frame RBM each rail - 3,000,000
in. · lbs. |
|
CARRIER LENGTH |
USABLE CAB-TO-BOGIE
WITHOUT CAB
CARRIER |
23
24
25
26
27
28 |
138 - 144
144 - 158
156 - 168
168 - 180
180 - 190
190 - 196 |
-
Back to top
Note: Vulcan reserves the right, without notice and without
obligation, to improve or modify products, which may change the
specifications, models and feature availability.
|
|
|
Contact Jeff Ingram, Sales and
Service Representative at
1-662-280-6761 M-F 8AM - 5PM CST.
Toll Free 1-866-280-6761 - Fax 1-662-280-6875
Email Us Anytime
Jeff@Wrecker-Sales.com
|
|
|
|
|
|
|
