|
|
 |
|
|
|
|
 LCG™ CARRIER - 30
& 40 SERIES
. |
|
 30
& 40 Series |
|
Miller Industries
has introduced a new L.C.G. (Low Center of Gravity) Industrial
Carrier. The L.C.G. carrier is available in deck lengths from 26-30
feet with deck capacities of 30,000 or 40,000 lbs. The carrier uses
a revolutionary new patent pending subframe design that allows the
carrier deck to sit 6" to 8" lower than conventional industrial
carriers. The low deck height allows for the transport of many loads
that would be over height on a traditional industrial carrier and
would need to be hauled on a trailer. Additionally the L.C.G.
Carrier is more stable Against sway and rollover with heavier loads
and provides a load angle as low as 11 degrees making it ideal to
load equipment and machinery. The operator is able to secure most
loads from the ground without the need to climb up on the deck. The
unit is designed to be mounted on a chassis equipped with super
single rear Wheels and tires. |
| |
|
Print Product Brochure |
|
|
STANDARD FEATURES
|
|
Full Length Sub Frame |
Winch Air Clutch Release |
|
Full Length Nylatron Slide Pads |
Bed Anti-Tilt Feature |
|
Painted with Black Acrylic Urethane |
Dual Lift Cylinders |
|
Driver's & Passenger Side Chain Trays |
Dual Extension Cylinders |
Fixed Position Stabilizer with Adjustable
Extension Stands |
Positive Lock Down System |
|
Six Tie-Down Points (2 Front, 4 Rear) |
Dual Illuminated Controls |
|
Floor Level Sides with Stake Pockets |
Back-Up Alarm |
|
20,000 lb. Planetary Winch with Spring Tensioner |
Hydraulic Pump |
|
1/4" Tread Plate Deck |
Mud Flaps |
|
Two Front Safety Chains |
Federal Standard 108 Lighting |
|
Hydraulic Winch & Cable |
|
OPTIONAL FEATURES
|
|
Hydraulic Dock Stabilizer |
Window guard in the Cab Protector |
|
Combination Wheel Lift & Dock Stabilizer |
Tri-Box Toolboxes
(For Frame Mounted Pylon) |
|
Removable Side Rails |
Locking Chain Rack
(For Body Mounted Cab Protector) |
|
Rub Rails (Trailer Style with Integrated Stake Pockets) |
Switch Panel |
|
Tool Compartments |
Work Area & Emergency Lighting |
|
PTO |
Optional Color on Top of Deck & Side Rails |
|
Smooth Floor in Lieu of Tread Plat |
Wired or Wireless Winch Remote |
|
Apitong Wood Floor |
30,000 lb. Planetary with
Spring Tensioner (30 Series Only) |
|
Rumber Flooring |
Trailer Ball kit for the
Optional Wheel Lift |
|
Additional Key Slots |
Fork Holders & Lift Forks for
the Optional Wheel Lift |
|
Dual Key Slots Down Center or Deck Edge |
Pintle Hook or Hitch Adapter for
the Optional Wheel Lift |
|
Bed Mounted Cab Protector |
|
Frame Mounted Pylon
(Requires 8" Additional CA) |
|
|
|
Print Product Brochure |
|
|
|
Tow Rating 20,000
lbs. 30,000 lbs.
BED SPECIFICATIONS
|
|
|
30 SERIES
|
40 SERIES
|
|
Load Rating |
30,000 lbs. |
40,000 lbs. |
|
Platform Length |
26', 27', 28', 29', 30' |
26', 27', 28', 29', 30' |
|
Platform Floorplate Thickness |
1/4" |
1/4" |
|
Platform Width (Outside) |
102" |
102" |
|
Platform Width (Inside)* |
97" |
97" |
|
Platform Mainbeam |
8" I-Beam |
8" I-Beam (reinforced) |
|
Platform Crossmembers |
3" x 3" Cor-ten Steel |
3" x 3" Cor-ten Steel |
|
Crossmember Spacing |
8" On Center |
8" On Center |
|
Platform Sides |
7" x 4" x 3/8" Angle |
7" x 4" x 3/8" Angle |
|
Subframe Rails |
6" x 3" x 3/8" H.S. Tube |
6" x 3" x 1/2" H.S. Tube |
|
Rear Pivot |
1 Piece 2" Diameter |
1 Piece 2" Diameter |
|
Winch (1st Layer) |
20,000 lb. Planetary |
20,000 lb. Planetary |
|
Cable |
9/16" x 75' |
9/16" x 75' |
|
Bed Tilt Cylinders |
4 1/2" Bore |
4 1/2" Bore |
|
Bed Extension Cylinders |
4" x 120" Stroke |
4" x 120" Stroke |
|
Wheel Lift Rating (Extended) |
6,000 lbs. |
10,000 lbs. |
|
Tow Rating |
20,000 lbs. |
30,000 lbs. |
|
Deck Height above Truck Frame(steel) |
6 1/4" |
6 1/4" |
|
* Inside Bed Width Applies to Optional Removable Rails |
CHASSIS RECOMMENDATIONS
|
The LCG Carrier Requires Super Single Tires & Wheels,
445/50R 22.5 with at least 58"
between the tire sidewalls (interior).
Fuel Tanks must be under cab, not to extend more then 12"
behind the cab. Fuel fill must
not be behind the cab.
The preferred location for the battery box is under the
passenger seat, battery boxes in
other locations may require relocation. |
|
|
|
Air bag rear suspension is recommended. |
|
|
|
Minimum Frame Length Behind Center of Rear Axle |
60" |
|
Minimum Frame Height |
40.5" |
|
Maximum Frame Height |
44" |
|
|
|
30 & 40 SERIES TANDEM AXLE 30 SERIES
40 SERIES
|
|
Minimum GVWR |
50,000 lbs. |
56,000 lbs. |
|
Minimum Frame RBM (Each Rail) |
3.0 Million Inch Pounds |
3.0 Million Inch Pounds |
|
Minimum Cab to Bogie (clear ‡) |
|
26' |
174" |
174" |
|
27' |
182" |
182" |
|
28'* |
190" |
190" |
|
29'* |
198" |
198" |
|
30'* |
206" |
206" |
‡ The outside frame rails of the chassis extending behind
the cab must be free of fuel tanks,
air tanks, battery boxes, exhaust racks, etc. |
|
* Check state and local road restrictions for maximum
vehicle lengths allowed. |
NOTE: All
ratings are based on structural factors only, not vehicle
capacities or capabilities.
Specifications shown are approximations and may vary
depending on chassis selected.
Platform rating is based on an equally distributed load.
Actual payload carrying capacity is
determined by the curb weight of the chassis and equipment
and should not exceed the
GVWR of the Chassis.
Miller Industries Towing Equipment Inc. reserves the right
to change or modify product and/or specifications without
notice or obligation. Some
equipment shown is optional. |
|
|
Contact Your Sales and Service
Representatives at
1-662-280-6761 M-F 8AM - 5PM CST.
Toll Free 1-866-280-6761 - Fax 1-662-280-6875
|
|
|
|
|
|
|
|
