Innovation
in Heavy-Duty Integrated
Towing and Recovery Equipment |
| |
|
Almost
two decades ago, Vulcan became a pioneer in the heavy-duty
integrated towing and recovery market with the introduction of the
Vulcan 940 and the continued it's advancement in equipment
technology with the Vulcan 3025. The V-100 is just one more
example of Vulcan's continued pursuit in providing the most
innovative equipment to meet the demands of professional
heavy-duty operators.
Stainless steel tool compartments with keyless entry, 2-speed
winches, the Euro-lift stinger with a 144" of reach and a
3-stage recovery boom providing over 25 feet of boom elevation are
just a few of the many standard and optional features that have
continued Vulcan's legacy as the innovator....not the imitator.
|
|
STANDARD
BODY FEATURES |
| 96"
Wide Aluminum Modular Body |
Remote
Keyless Lock/Unlock for Toolboxes |
Dual
Control Stations with Direct Link
Activated Levers |
Full
15 Function Remote Lanyard Controls
(passenger side) |
| Underlift
In-Cab Controls |
9-Way
Switch Panel |
| Dual
Pressure Gauges |
Independent
Hydraulic Rear Spades |
Pavement
Pads
(n/a with Flipper Feet Opt.) |
Lower
Work Lights |
| Mud
Flaps |
Tailboard
Fork & Chain Storage |
| Fork
Holders |
Safety
Chains in Rear Pockets |
| 2
Section Hydraulic Pump |
Light
Pylon |
| Tailboard
D-Rings |
LED
Lighting |
| Aluminum
Tread-Plate Walkway |
LED
Toolbox Lighting |
| Adjustable
Shelves |
Dual
Chain Racks |
| Air
& Electrical Hook-UP |
Rubber
Isolators for Body Mounting |
| Wireless
Remote Control |
|
|
STANDARD
BOOM FEATURES |
| Power
Elevation |
Power
Extension |
| Dual
Hydraulic Winches |
Air
Cable Tensioners |
| Air
Free Spool |
360°
Sheave Head |
| Cable
Tie Backs |
Tailboard
Recovery Anchors |
| Spherical
Bearings in Main Boom Pivot |
Single
Grease Fitting for Lubrication of
Inner Boom Top Pad |
|
STANDARD
UNDERLIFT FEATURES |
| Power
Elevation & Extension |
Hydraulic
Fold |
| Patented
Power Tilt |
3-Stage
Design |
| 1
Piece Pivot Pin |
Upper/Lower
Thrust Washer |
| Low
Profile Crossbar |
70°
Pivoting Crossbar |
| 6
Pairs of Lifting Attachments |
1
Pair Hook Adapters |
| Low
Profile Fork Receivers |
High
Stands |
| 1
Pair Spring Lift Adapters |
King
Pin Lifting Plate |
|
OPTIONAL
EQUIPMENT |
| Air
Shift PTO |
Multi-Positional
Flipper Feet |
| Heavy
Duty Tire Lift |
Tire
Lift Storage Brackets |
| Chain
Hook Slide Adapter |
Pintle
Hook Attachment |
5th
Wheel Plate
(requires pintle hook attachment) |
King
Pin Attachment
(requires pintle hook attachment) |
Trailer
Ball Adapter
(requires pintle hook attachment) |
Additional
Lift Forks |
| Underlift
Light Kit |
Additional
Lighting |
| Boom
Angle Indicator |
Chain
Package |
| Endless
Loop Sling Package |
Screw
Pin Shackle Kit |
| Side
Work Lights |
Power
Touch System |
| Tailboard
Underlift Controls |
3
or 7 Drawer Toolbox |
| Washdown
Sink |
Engine
Data Info Center |
| Snatch
Blocks |
Wide
Load Light Bar |
| Rear
Camera & Monitor |
Navigation
System & Rear Camera |
| Convenience
Groups |
Aluminum
Dress-Up Kits |
| Installation |
|
|
|
BOOM
SPECIFICATIONS |
| V-100 |
|
|
| Boom
Structural Rating (S.A.E.) |
Retracted
30° |
Extended
30° |
| |
100,000
lbs. |
35,000
lbs. |
| Maximum
Angle |
35° |
| Maximum
Hook Height (inches) |
248" |
Reach
Past Tailboard at
Minimum Boom Angle (inches) |
140" |
| V-100
- 3-Stage |
|
|
| Boom
Structural Rating (S.A.E.) |
Retracted
30° |
Extended
30° |
| |
100,000
lbs. |
18,000
lbs. |
| Maximum
Angle |
35° |
| Maximum
Hook Height (inches) |
304" |
Reach
Past Tailboard at
Minimum Boom Angle (inches) |
236" |
|
UNDERLIFT
SPECIFICATIONS |
| V-100 |
|
Capacity
Fully Extended
to C.L. of Forks |
18,000
lbs. @ 116" |
Capacity
Fully Retracted
to C.L. of Forks |
55,000
lbs. @ 67" |
| Underlift
Tilt |
12°
+ 6° - |
| V-100
- w/EuroLift |
|
Capacity
Fully Extended
to C.L. of Forks |
18,000
lbs. @ 144" |
Capacity
Fully Retracted
to C.L. of Forks |
55,000
lbs. @ 67" |
| Underlift
Tilt |
12°
+ 6° - |
| WINCH
SPECIFICATIONS |
| Winch
Capacity |
(2)
50,000 lbs. |
| Winch
Type |
Planetary
2-Speed |
| Cable
Specifications |
3/4"
x 250' 6x37 I.W.R.C. |
|
|
|
|
|
BODY
SPECIFICATIONS |
| V-100
- Tandem Axle |
|
|
Common Body Configuration |
160"
C.B. |
|
Additional Body Configurations |
180"
/ 200" / 220" C.B. |
| V-100
- Tri Axle |
|
|
Common Body Configuration |
180"
C.B. |
|
Additional Body Configurations |
200"
/ 220" C.B. |
|
CHASSIS
RECOMMENDATION |
|
Front Axle (lbs.) |
14,600 |
|
Rear Axle (lbs.) |
40,000 |
|
Clear C.A. or C.B. |
156"
to 200" C.B. |
|
After Frame from Center of Rear Axle |
36" |
|
R.B.M. (in./lbs.) |
3,000,000
|
| |
NOTE:
Some optional equipment may be shown. Other Vulcan Towing
and Recovery Equipment is available from your local Vulcan Distributor.
|
NOTE:
Ratings are based on structural factors only - not chassis
capacity. All chassis specifications are minimums, heavier specifications may be
required depending on chassis and equipment weights. Vulcan reserves the right,
without notice and without obligation, to improve or modify products, which may change the
specifications, models and featureavailability.
|
V-100
